| | | | |
| | | |
| ELECTRO CORP |
| 3015A |
Thermocouple |
 |
| Back to Top ^ |
| | | |
| ELECTRO SCIENCE |
| 45908 |
Tube, FLOW 8000C |
 |
| 6525357 |
Lamp, QCW70 8000C |
|
| Back to Top ^ |
| | | |
| ELECTRO TECH |
| UTE CB 2018 ISS 3 |
PCB, 1a, 15v |
 |
| Back to Top ^ |
| | | |
| ELECTROGLAS |
| 002737G1 |
PCB, AWH AW3 DSW |
 |
| 002741G1 |
PCB, AWH AW4 DSW |
 |
| 002757G1 |
PCB, AW8 Prog. display DSW |
 |
| 002789G1 |
PCB, AWH AW17 DSW |
 |
| 002864G1 |
PCB, AWH AW18 DSW |
 |
| 002875G1 |
Assembly, Prealign STN SENS |
 |
| 002887G1 |
Motor, prealign, 27VDC, STN DSW |
 |
| 002967G1 |
PCB, AWA AX5 DSW |
 |
| 002973G2 |
PCB, AWA AX3 DSW |
 |
| 005314G1 |
PCB, AU50 DSW |
 |
| 005406G1 |
PCB, AU51 DSW |
 |
| 005568G1 |
PCB, AWH AW21 DSW |
|
| 005958G1 |
PCB, AX12 Prog selector DSW |
 |
| 005963G1 |
PCB, AX11 Video processor D |
 |
| 006143G1 |
Motor, 27VDC, with coupling |
 |
| 006193G1 |
Assembly AWH Flatfinder, complete with motor |
 |
| 006199G1 |
Worm drive assembly AWH TA |
 |
| 014784G1 |
Assembly, Maximus 1000 ANOD |
 |
| 014812G2 |
Illuminator AWA DSW |
 |
| 019483-008 |
Connector, Molex |
 |
| 028123G1 |
Motor, 6VDC with gearbox 22:1, assy RMS form |
 |
| 028124G1 |
PCB, RMS Fork retract sensor |
 |
| 028139G1 |
Sensor, Elevator align DSW (with OPB806) |
 |
| 035398 |
PCB, Q Bus Grant DSW |
 |
| 035679G1 |
Rod, Maximus bullet DSW |
 |
| 036996G1 |
Detector AF scanning |
 |
| 037186G1 |
PCB, AU62 DSW |
 |
| 037210G3 |
PCB, AU64 DSW |
 |
| 037214G1 |
Assembly, Front Speaker and |
 |
| 037215G1 |
Assembly, Button Box and Co |
 |
| 037399G1 |
PCB, AU63 Servo Logic Galvo |
 |
| 038310 |
Pipe, RMS Back aligner DSW |
 |
| 046346-002 |
Solenoid, 2001 VAC |
 |
| 046366G4 |
PCB, AU66 DSW |
 |
| 046433G1 |
PCB, AU65 DSW |
 |
| 052043-001 |
Transformer, ILLUM |
 |
| 1006243G1 |
Motor, AWH Elevator DSW |
|
| 1020-492700 |
PCB, Input/Output 602 Mask Clean |
 |
| 10841 |
Power Supply, CCU 5V DSW |
 |
| 13053 |
Gear, AWH TA anti-backlash |
 |
| 14741 |
Capacitor, 2500UF 75VDC |
 |
| 14971 |
Capacitor, 22000UF 35VDC |
 |
| 244238-001 |
Motor, 2001 PREALI |
 |
| 244890-001 |
Motor, 2001 PREALI |
 |
| 247333 |
Assembly, Chamber Heaters DS |
 |
| 2523-900-005 |
Nozzle, fan TMP mask clean |
 |
| 2618 |
PCB, Sierra Vertical sweep DSW |
 |
| 2619 |
PCB, CCU Horizontal drive |
 |
| 2621 |
PCB, Sierra output video DS |
 |
| 2622 |
PCB, CCU input videa DSW |
 |
| 26915 |
Hose/tubing, black nylon covered, 19/29 AWG, in feet |
 |
| 28060 |
Pipes, front platen aligner |
 |
| 28286 |
Switch, AWH LIMIT DSW |
 |
| 28672 |
Assembly, CRT DSW, P/N 028472 |
 |
| 310107 |
Chamber Return Filter DSW |
 |
| 3501-000011 |
Spinner Motor M603 Ultratest |
|
| 36107 |
Box, Maximus Igniter, Ignitor DSW |
 |
| 4102-15 |
Kit, pump rebuild |
 |
| 4163 |
Gear, pre-align STN worm DSW |
 |
| 4164 |
Gear, prealign stn anti bac |
 |
| 4803-00000-1 |
Triac M603 |
 |
| 4827 |
Pioncher AWH SEC POST DSW |
 |
| 4828 |
Roller, AWH pincher DSW |
 |
| 49063 |
Switch, joystick, P |
|
| 49640 |
Switch, toggle, 250V 2A |
 |
| 510-300 |
Brush, mask clean, 602 |
 |
| 5918883EO1 |
Power Supply, EG Prober, 1034X (220V, 1kW, 50/60Hz) (S/N= X401044) |
 |
| 62254 |
Screw, 2.56 X 3/8 |
 |
| 681801 |
Assembly, Chamber, Secondary |
 |
| 852201 |
Assembly, Chamber RTD DSW |
 |
| 9262-08G1 |
PCB, AU2 fine servo pre-amp |
 |
| 9262-16G1 |
PCB, AU4 DSW |
 |
| 9262-173G1 |
PCB, AU40 Coarse servo pre-amp |
 |
| 9262-177G1 |
PCB, AU41 Servo output amp |
 |
| 9262-244G1 |
PCB, AU47 DSW |
 |
| 9267126G1 |
Sensor, RMS elevator limiter |
 |
| C1056992 |
Liner, inner hotpot 2 |
|
| SI 120140 |
Knob, Maximus adj DSW |
 |
| XQ 1440 |
Pick up Tube, Sierra Nuvicon Camera |
 |
| Back to Top ^ |
| | | |
| ELECTROMATIC |
| SR 110 024 |
S-System Machine Operator Safeguard 24VAC 11pin |
 |
| ST 115 120 |
Relay, Temp Control Laser S |
 |
| Back to Top ^ |
| | | |
| ELECTRONICS MEASUREMENTS INC. |
| TCR 10T500-2-0V |
TCR Power Supply (1 Has Digital Screen) |
|
| TCR 60S10-1-D-10T/P- |
TCR Power Supply (105-210VRMS, 50-60Hz) (S/N= 85J-6842 -0V) |
 |
| Back to Top ^ |
| | | |
| ELECTROTECH |
| 171066 |
RF Feedthru Bodies |
 |
| 171073D02 |
Feedthrough Seal Spacer |
 |
| 171663 D04 |
Grub Screw, Skt Set, Vented |
 |
| 174060 |
Door Locator Plate |
 |
| 174147D01 |
Optic shield |
 |
| 174162 D03 |
Spacer |
 |
| 174163D04 |
PVC Spacer |
 |
| 181266D01 |
Stud, threaded target MS620 |
|
| 182246 |
ANODS SHIELD RING |
|
| 186889D01 |
Spacer, O-Ring Minilock MS6 |
|
| 191106 |
Window, Outer |
 |
| 191321 |
Window Glass Liner |
 |
| 191347 |
Optic Disc 10 Position |
 |
| 191348 |
Arm Optic Encoder |
 |
| 191351 D 03 |
Base Insert Ceramic |
 |
| 191393 D 02 |
Spacer |
 |
| 191684 D 01 |
Centralising Washer |
 |
| 191775 D 01 |
Carrier, O-Ring, Rep.9 |
 |
| 193130 D 01 |
Spacer. Rep .21 Rising Shield |
 |
| 193371 D 03 |
Bush, Inner Slice Lift |
 |
| 193372 D 02 |
Guide, Poste |
 |
| 193525 C 03 |
Feedthrough, R.F. |
 |
| 193579 |
Nut, Inner Slice |
 |
| 193691 B 03 |
Table Support Plate |
|
| 193695 D 02 |
Location PEG |
 |
| 193696 D 01 |
Table Guide peg |
 |
| 193697 D 03 |
Plug, Retaining |
 |
| 194367/01 |
Seal, Nitrile, Shaft |
 |
| 201414 |
O-Ring, 10.77x2.62, Viton DS 111, |
|
| 201432 |
Belt drive, 201432 MS6200 |
|
| 201437 |
O-Ring, 78.97x3.53, Viton |
 |
| 201440 |
O-Ring, 12.37x2.62 |
|
| 201448 |
O-Ring, 14.75x0.210 Viton |
 |
| 201474 |
O-Ring, 93.98x3.53 Viton (37") |
 |
| 201474D03 |
O-Ring, 26.5x0.139 Viton |
|
| 201479 |
O-Ring, 19.5x3 Viton |
 |
| 201493 |
O-Ring, 7.59x2.62, Viton |
 |
| 201499 |
Belt drive, 201499 MS6200 |
|
| 201518 |
Belt drive, 201518 MS6200 |
|
| 201670 |
O-Ring, 89.5x3.0 |
 |
| 201684 |
O-Ring, 39.5x3.0 |
|
| 201706 |
Belt drive, MS6200 |
|
| 201708 |
Belt drive, 201708 MS6200 |
|
| 201711 |
Belt drive, 201711 MS6200 |
|
| 201854 |
O-Ring, 64.5x3, Viton |
 |
| 201872 |
O-Ring, 29.5x3.0 |
 |
| 206208 |
Drive Belt 249EP |
 |
| 206215 |
Seal, Flange 230 |
 |
| 206216 |
Belt drive, 206216 MS6200 |
|
| 206251 |
O-Ring, 185x4mm White |
 |
| 206252 |
O-Ring, 234.54x3.53 White for Transporter |
 |
| 206257 |
Belt |
 |
| 206262 |
Belt drive, 206262 MS6200 |
|
| 206264 |
Belt |
 |
| 206271 |
Belt drive, 206271 MS6200 |
|
| 206272 |
Belt drive, 206272 MS6200 |
|
| 206273 |
Belt drive, 206273 MS6200 |
|
| 206274 |
Belt drive, 206274 MS6200 |
|
| 206282 |
Belt drive, 206282 MS6200 |
|
| 206289 |
O-Ring, 14.5x1.78, white |
 |
| 206295 |
O-Ring, 56.87x1.78 |
 |
| 206344 |
O-Ring, 107.62x1.78 |
 |
| 220019 |
Pneumatic Flow Regulator Compair 8D201-RES |
 |
| 220023 |
Sensor, Flying Lead |
 |
| 220036 |
Actuator (Air Cylinder) 32x50mm |
 |
| 220075 |
Valve, Pneumatic, Compair |
 |
| 221511 |
Nylon Tube |
 |
| 221512 |
Rislan Tube 4x6 |
 |
| 225029 |
Cylinder, Air, 65 mm Compair |
 |
| 231856 |
Switch, flow, C/W 2Meters 2 Core Sleeved Cable Chem-tec 125-316-BPNO A65079 |
 |
| 241863 |
Circlip, Internal D2000 Series K Type DIN984 JK32 34.4mm |
 |
| 241866 |
Bearing, Upper |
 |
| 241867 |
Bearing, Lower TP12 30/55x13 32006X |
 |
| 245214 |
Spring |
 |
| 246054 |
Bearing, 3/16 Needle Outer 0.5/8.75x6.2 SCF34TN |
 |
| 246329 |
Drive Belt 11" |
 |
| 251866 |
Switch, Optical |
 |
| 251871 |
Plug, 3way, DIN, male shell |
 |
| 252347 |
Filament Rea MS6200 (281734 |
|
| 264040 |
Valve, rep.15 for TAB |
 |
| 285016 |
Insulating Ceramic Feedthrough |
 |
| 285211 |
Ceramic |
 |
| 501356 |
Resistor, 5R0, 5%, 50W |
 |
| 512406 |
Capacitor, 10KVDC 1uF |
 |
| 527044 |
Thyristor Power Module 90A 1200V Semikron SKKT 31/12E 5436 |
 |
| 550708 |
Contactor, 24VDC coil, 3phase, + 2 auxiliary, 600V, 12A, type PCD 3.10 E, DIN rail mounting |
 |
| 560379 |
Diode, Valve EY81-021-86D Mullard |
 |
| 571006 |
Burst Fire Module ZVS BM2 |
 |
| 6380723 |
Bearing, 3/16 Needle Outer 0.5/8.75x6.2 SCF34TN |
 |
| 85/239 |
Platen |
 |
| A4317J |
PCB, UTEK 3017 |
 |
| A80519 D01 |
Arm return cable |
 |
| A91555 D04 |
Arm Drive Wire Assy |
 |
| A92002/01 |
Table Optic Encoder |
 |
| A92266/01 |
Thermocouple Assy |
 |
| A92447/02-07 |
N2 Purge Electric Box A |
 |
| AC0233/02 |
PCB, Logic, CB343 |
 |
| AC1058/06 |
PCB, CB2063 |
 |
| ND 0811 |
Diode, infra-red emitter, TIL 31A |
 |
| ND 5225 |
Photo Diode |
|
| ND 5226 |
Infrared Detector |
 |
| ND5032 |
View Port Seal Ring |
 |
| R41176 |
ND Keyboard (from B2 to B12) |
 |
| R50-15 |
Filament (5 pck) |
 |
| SC260D2 |
Triac SC260D2 |
 |
| X1480 |
O-Ring, 146.4x1.78 Silicone (Seal 324) |
 |
| X1504 |
Door to Shaft Circlip |
 |
| Y14033 |
Contactor, 24VDC coil, 3phase, + 2 auxiliary, 600V, 12A, type PCD 3.10 E, DIN rail mounting |
 |
| Back to Top ^ |
| | | |
| ELECTRPTECH |
| 6380708 |
Door Locator Plate |
 |
| Back to Top ^ |
| | | |
| ELEMO A.G. BASEL |
| FM 87/60/K |
Motor (W. No. 1534816) |
|
| Back to Top ^ |
| | | |
| ELESTA |
| KR11S |
Relay, 110VAC, 3PDT (3pole c/o), 6A@220VAC, 11-Pin Base (circle), with manual button |
 |
| SKR115 A 110VDC |
Relay, 110VAC, 3PDT (3pole c/o), 10A@250VAC, 11 pin (circle) base, Type Elesta SKR 115 |
 |
| ZKR118 |
Base, Relay, 11pin round |
 |
| Back to Top ^ |
| | | |
| ELETTA |
| V1-G15 1-2L |
Liquid Flow Monitor V1-G15 |
 |
| V1-G15 2-4L |
Liquid Flow Monitor V1-G15 2-4L/min |
 |
| V1-G15 8-16L |
Liquid Flow Monitor V1-G15 8-16l/min +Valve |
 |
| V1-GL15 |
Switch, Flow V 16 |
 |
| V1GL1512L |
Liquid Flow Monitor V1-G15 |
 |
| V1GL1524L |
Liquid Flow Monitor V1-G15 2-4L/min |
 |
| V1GL15816L |
Liquid Flow Monitor V1-G15 8-16l/min +Valve |
 |
| Back to Top ^ |
| | | |
| EME |
| HY 200-2215-150 |
Motor, Stepper, 4-Phase, 1.5A, 1.5ohms Per Phase |
 |
| Back to Top ^ |
| | | |
| EMERSON |
| 5N3-1 |
Power Supply, 5V Serv GCA |
 |
| Back to Top ^ |
| | | |
| EMI |
| Part No. not known |
Bag, filter, latex paper with microliner for clean rooms |
 |
| Back to Top ^ |
| | | |
| EMLUX HOLDINGS LTD. |
| 09959 |
T-Bar spring steel fasteners |
 |
| Back to Top ^ |
| | | |
| ENGEL |
| GNM 2130G5 |
Motor, Crucible Drive (Engel GNM 2130-G5) 5880:1 |
 |
| WE 3140 /2 TR |
Motor, 50W, 220v, 50Hz |
 |
| WE 4040 TR |
Fan, Turbo for Triode Cooling, WE4040 |
 |
| Back to Top ^ |
| | | |
| ENGINE |
| TTIDM-150 |
Delay module |
 |
| Back to Top ^ |
| | | |
| ENGINEERED COMPONENTS |
| MDLDM-TTL-100 |
Delay 100 |
 |
| PTTLDL-15-2 |
Delay Line 4BIT |
 |
| PTTLDL-7-2 |
Delay Line |
 |
| PTTLDL-7-3 |
Delay Line |
 |
| TTLDM-100 |
Logic Delay Module |
 |
| Back to Top ^ |
| | | |
| ENGINEERED TECHNICAL PRODUCTS |
| OM-A |
Roller, Mixer/Agitator for Bottles/Tubes |
 |
| Back to Top ^ |
| | | |
| ENGINEERING |
| 530-700008 |
Filter, For VAQUA |
|
| Back to Top ^ |
| | | |
| ENI |
| EGR3200-4172 |
PCB, Resistor Board |
 |
| PL2-HFPE |
Plasmaloc 2-HF Generator |
 |
| Back to Top ^ |
| | | |
| ENI POWER SYSTEMS, INC |
| PL-1HF PE-2 |
Plasmaloc 1-HF Generator 100-450Khz, (S/N= 372) |
 |
| Back to Top ^ |
| | | |
| ENTRELEC |
| 011566323 |
Fuse, terminal, Lever action, LED, DIN rail. |
 |
| 011836816 |
Cover, End, grey, for 2.5-10mm standard DIN rail terminal |
 |
| 012836810 |
Cover, End, blue, for 2.5-10mm end terminal DIN rail |
 |
| 116 771 20 |
Terminal End Covers |
 |
| 230-000-12 |
Terminal Marker, 5x5mm, sheets of 100 |
 |
| 5120 |
Terminal block, single pole, 800V-AC-DC, DIN Rail Mounting |
 |
| ES 50 |
Socket, Relay, 300VAC, 12A, DIN rail mounting |
|
| Back to Top ^ |
| | | |
| EPAK ELECTRO |
| 6516670EO1 |
Lamp, KS Prober LO |
 |
| Back to Top ^ |
| | | |
| EPSON |
| ERC-05 |
Cassette, ribbon, |
 |
| Back to Top ^ |
| | | |
| EPT |
| 111-40341 369 |
PCB |
 |
| Back to Top ^ |
| | | |
| ERACON |
| IN060PD3 |
Air Cylinder |
 |
| Back to Top ^ |
| | | |
| ERATON |
| 92-00132-00 REV |
HFP/LVPS Rear Panel (Modified) |
 |
| Back to Top ^ |
| | | |
| ERNI |
| REL14-A1-1.3 24V |
Relay, 24VDC, SPDT (1pole c/o), 4A@250VAC, PCB mounting |
 |
| REL14-A3-1.3 24V |
Relay, 24VDC, SPDT (1pole c/o), 4A@250VAC, PCB mounting |
 |
| Back to Top ^ |
| | | |
| ESCAP |
| 28L 28 416E 183 |
Motor, Waferhand, with gearbox |
 |
| 34L 11-219.2 |
Motor, Escapement |
 |
| Back to Top ^ |
| | | |
| ESEC |
| 110.0024.1 |
Valve, pressure, VAC |
 |
| 110.0053.1 |
Valve, solenoid, 24VDC, 4.5W, 65.231 |
 |
| 110.0310.1 |
Valve, Solenoid, NW3 |
 |
| 110.0312.1 |
Valve, Solenoid, Lucifer 131-M-14 12V |
 |
| 110.0337.1 |
Meter, Vacuum, 0 to -60mBar (Mfr Bourdon) |
 |
| 110.0340.1 |
Meter, air, 0-58psi (4 bar) (Mfr Bender) |
 |
| 110.0500.1 |
Contact, Quick |
 |
| 130.0045.1 |
Motor, Escapement |
 |
| 130.0101.1 |
Magnet, lifting |
 |
| 130.0106.1 |
Motor, Waferhand, with gearbox |
 |
| 130.0125.1 |
Motor, buffer, with 1:199 gearbox. |
 |
| 140.0024.1 |
Bearing, 0024 ESEC 8/22x7 608Z-2Z |
 |
| 140.0052.1 |
Bearing, ball-race 6/19x6 Shielded 626Z |
 |
| 140.0061.1 |
Bearing, 8/22x7 ZZ (Series 608) Twin Shields |
 |
| 140.0098.1 |
Bearing, Duplex, EPOXY-X 6/16x6, pair of S626 + SF626 |
 |
| 140.0453.1 |
Bearing, 0053 6/19x6 Rubber Sealed Series 626 |
 |
| 140.0454.1 |
Bearing, 0054 ESEC 7/14x5 Series 1470 |
 |
| 140.0474.1 |
Bushing, 4/7x4, phosphor bronze. |
 |
| 140.0487.1 |
Bearing, 0487, phosphor bronze |
 |
| 140.0501.1 |
Belt, toothed, L=200mm x 40 teeth, W=6mm |
 |
| 140.0597.1 |
Belt, toothed, L=182mm x 73 teeth, W=6mm |
 |
| 140.0600.1 |
Belt, toothed, L=900mm x 180 teeth, W=6mm |
 |
| 140.0601.1 |
Belt, Y-SHUTTLE 0601-1 984 Synchroflex T2/360 |
 |
| 140.0610.1 |
Belt, toothed, L=220mm x 110 teeth, W=6mm |
 |
| 140.0611.1 |
Belt, toothed, L=280mm x 140 teeth, W=6mm |
 |
| 140.0614.1 |
Belt, toothed, T5 575 SYNC 0614 |
|
| 140.0615.1 |
Belt, toothed, L=840mm x 168 teeth, W=6mm |
 |
| 140.0616.1 |
Belt, toothed, SYNC 0616 270 Synch T5/165 |
 |
| 140.0957.1 |
Spring, 0957 ESEC |
 |
| 140.0985.1 |
Spring, 0985 ESEC |
 |
| 140.0994.1 |
Spring, 0994 ESEC |
 |
| 140.1219.1 |
Spring, Rocker Arm |
 |
| 140.9081.1 |
Belt, toothed, 365 T2.5/145 9081-1 ES |
 |
| 140.9093.1 |
Belt, toothed, 9093.1HR T2.5/200 |
 |
| 140.9094.1 |
Belt, toothed, L=200mm x 80 teeth, W=10mm |
 |
| 140.9103.1 |
Belt, toothed, L=230mm x 92 teeth, W=6mm (HR table) |
 |
| 140.9104.1 |
Belt, toothed, L=265mm x 106 teeth, W=6mm (awl) |
 |
| 140.9105.1 |
Belt, toothed, L=285mm x 114 teeth, W=6mm (HR Table X) |
 |
| 190.1441.1 |
Choke, 1mH, 8A |
 |
| 190.1523.1 |
Sensor, proximity, 10-30VDC |
 |
| 190.1540.1 |
Sensor, Light carrier, 500mm |
 |
| 190.1564.1 |
Sensor, Optical, F5RPNP |
 |
| 210.0072.1 |
Fuse, 20mm, 16A, 250VAC, Type FST |
 |
| 210.0084.1 |
Relay, 24VDC, 3PDT (3pole c/o), 10A@250VAC, 11pin(circle), with test button |
 |
| 210.0518.1 |
Lamp, 210-0518-1 ESEC |
 |
| 210.1418.1 |
Switch, safety, 3A ESEC |
 |
| 210.1428.1 |
Fan, 24V, 50/60Hz, 20W, approx 120mm square x 38mm high |
 |
| 210.1429.1 |
Switching Regulator (Positive), Input: 29-80V, Output: 24V, 8A |
 |
| 210.1431.1 |
Switching Regulator (Positive), Input: 8.3-80V, Output: 5V 10A |
 |
| 210.1453.1 |
Switching Regulator (Triple), Input: 19-80V, Output: +12VDC, 2.5A, +15VDC 2.5A, -12VDC 2.5A |
 |
| 210.1465.1 |
Switch, safety, 4.5A ESE |
 |
| 210.1757.1 |
Switching Regulator (Positive), Input: 42-80V, Output: 36V 8A |
 |
| 210.1879.1 |
Lamp, wire bond inspection, 12V 5W, BA9s, Halogen |
 |
| 230.0012.1 |
Thermocouple |
 |
| 230.0035.1 |
Heater, 3/8x5" 230V, 300W |
 |
| 230.0061.1 |
Temperature Controller Type 808 |
 |
| 250.0058.0 |
Tip, rubber, pick up, 110mils (2.79mm) |
 |
| 250.0063.0 |
Tip, rubber pickup, 160 |
 |
| 250.0067.0 |
Tip, rubber pickup, 200 |
 |
| 250.0071.0 |
Tip, rubber pickup, 240 |
 |
| 250.0075.0 |
Shank P & P Type B ESE |
 |
| 250.0077.0 |
Shank P & P Type C ESE |
 |
| 612-003 |
PCB, I/O 612-003 ESEC |
 |
| 618-003 |
PCB, INT 618-003 ESEC |
 |
| 620-003 |
PCB, Terminal Board |
 |
| 623-003 |
PCB, P10 ESEC 623-003 |
 |
| 627-030 |
Motor, 5 phase drive. |
 |
| 711-240 |
Encoder, shaft rotary, Hohner, with PCB |
 |
| 711-265 |
Roller, Vertical ESEC |
 |
| 711-266 |
Roller, horizontal |
 |
| 711-280 |
Roller, CP |
 |
| 711.100 |
Spring, 711-100 ESEC |
 |
| 730.7124 |
Clamp, fixed |
 |
| 730.7126 |
Clamp, moving index No. 3-6, Solenoid operated |
 |
| 730.724 |
Sensor, Carrier light FP and BP |
 |
| 760-182 |
PCB, Mulit conn ESEC |
 |
| 793-222 |
Sensor, Light Carrier ES |
 |
| 793.118 |
PCB, Z-print, |
 |
| 794.012 |
Roller, drive assy, wafer |
 |
| 794.013 |
Roller, shaft assy, wafer |
 |
| 841 095 |
Pin, die ejector |
 |
| 841 270 1 |
Pin, die ejector |
 |
| 841-050 |
Motor, Stepper, 4-Phase, 1.5A, 1.5ohms Per Phase |
 |
| 841-121 |
PCB, 841-121 ESEC |
 |
| 841-270 |
Pin, Die ejector HR |
 |
| 843-130 |
Clamping tool, 90 D (84 |
 |
| 853-025 |
Beam Sensor 853-02 |
 |
| 862-011 |
PCB, P&P 862-011 ESEC |
 |
| 862-019 |
Spring, 862-019 ESEC |
 |
| 862-048 |
Motor, Maxon 44.026.000-00.07 (-55) with HEDS 5310 encoder |
 |
| 862-051 |
Guide, front |
 |
| 888.132 |
Adaptor Bayonet |
 |
| 902.383 |
Assembly, Wire Tensioner |
 |
| 902.439 |
EFO Assembly |
 |
| 902.494 |
Electrode, EFO |
 |
| 902.514 |
Transducer assembly P1E20 |
 |
| HTD 740 3M 15 |
Belt, Pick and place 0580 PowerGrip HTD 564 3M 15 |
 |
| HTD 740 5M 12 |
Belt, Pick and place 0590 PowerGrip HTD 740 5M 12 |
 |
| Back to Top ^ |
| | | |
| ESTRSIL |
| TPA/45/E |
Auto Transformer, U1= 415V, 45kW, U2- 380V and 50Hz |
|
| Back to Top ^ |
| | | |
| ETA |
| 2-5700-P |
Single Pole Thermal Overcurrent Circuit Breaker with Tease, Without Manual Release , 240VAC, 28VDC |
 |
| Back to Top ^ |
| | | |
| ETRI FRANCE |
| 113XN 01 81 000 |
Fan, Model 113XN |
 |
| Back to Top ^ |
| | | |
| EUROTEK |
| ETK-MT3 |
Converter, Analog temperature signal |
 |
| Back to Top ^ |
| | | |
| EUROTHERM |
| 1300T1 |
Thermostatic mixer with interchangeable cartridge. filters and non return valves SE T1 3-28l/min |
 |
| 140-03-451-19-00 |
Euotherm Unit |
 |
| 140-03-451-19-60-00 |
Temperature Control |
 |
| 198-00 |
Socket for Eurotherm module |
 |
| 2408I |
Indicator and Alarm Unit, 2408i - accurate measurement with flexible functions |
 |
| 2408I/AL/RD/VH/V2/XX/XX/FH/A2/XX/ENG/ |
Indicator and Alarm Unit, 2408i - accurate measurement with flexible functions |
 |
| 425/081/13/36/073/001/00 |
Power Units in 4/20 supply 250v, output 10V, 15A |
 |
| 425A 40A/240V/110V120/0V/10/PA/ENG/CL/-/-//00 |
Power Thyristor driver (SCR driver), 40A, 25A, 240V, for heater unit |
 |
| 425A 40A/240V/220V240/0V10/PA/ENG/CL/-/-//00 |
Power Thyristor driver (SCR driver), 40A, 25A, 240V, for heater unit |
 |
| 461/083/13/48/060/002/37/00 |
Eurotherm Thyristor Unit, 240V |
 |
| 461/083/28/43/060/002/76/00 |
Eurotherm Thyristor Unit, 440V |
 |
| 808/D1/N0/R1/C2/(AKKC406) |
RS232/K Thermocouple unit |
 |
| 808/T1/0/0/C2/0/QLS/(AJHC200)// |
Temperature Controller Type 808 |
 |
| 810-047-000-070-699 |
Digital Controller, -50 to +50 |
 |
| 815S/TC/0V10/NONE/NONE/NONE/NONE/F/45/0/1300/C/ST/NO/E/IN/S/815STC0V10NONENONENONENONEF4501300CSTNOEINS815OTHERM. |
Eurotherm,815S, 85-264V |
 |
| 818P/RTD/RLGC |
Temperature Control Unit |
 |
| 861/083/13/19/008/002/00 |
Temperature Control Unit 110-130V / 200-260V with connector |
|
| 902S/IS/HDC/ARE//VH/XM///LE |
Temperature Control Unit |
 |
| Back to Top ^ |
| | | |
| EVATEC |
| 102225287 |
O-Ring, 7x3, Viton |
 |
| Back to Top ^ |
| | | |
| EXCEL PRECISION |
| 1031A |
Receiver, Laser |
 |
| Back to Top ^ |
| |